WPC Foam Board Machine

WPC Foam Board Machine is also called PVC foam board machine, foam board making machine. This emachine is designed for making PVC or WPC foam board with size 1220mm to 2450mm wide, 5mm to 50mm thickness boards, which can replace the nature wooden board and plywood, used for furniture and construction etc.

About Us

Qingdao Sunshine Machinery Co.,LTD

Qingdao Sunshine Machinery Co., Ltd. is a professional supplier of plastic extrusion equipment. Located in Jiaozhou City, Qingdao, Shandong Province, it is only a 20-minute drive from the airport. There are many expressways running through Jiaozhou City, and the transportation is very convenient. Qingdao Sunshine Machinery Co., Ltd. is a high-tech enterprise integrating scientific research, development, manufacturing, sales and service. With experienced technical personnel, a thorough understanding and rich experience in plastic technology, formulas and plastic machinery, so as to ensure that the plastic machinery produced is of high quality and high performance. The products of Qingdao Sunshine Machinery Co., Ltd. have been exported to the United States, Russia, India, Europe, Southeast Asia, the Middle East, Central Asia, Africa and many other countries and regions.

Components of WPC Foam Board Machine

WPC Foam Board Machine Parts

SRL-Z500/1000 hot-cooling mixer, capacity 500-700 kg/h, driven by 75 kw XIMO motor adjust by ABB inverter. Self-friction & electric heating for hot mixer, water cooling for cooling mixer. Tank wall made by 8mm thickness stainless steel.

Extruder die adopts T type design. Board thickness is adjustable. That means 5-25mm thickness, 1220mm wide foam board only need one extrusion die, unlike profile die, each size needs one set. 5-25mm thickness boards need one set of T-die. 25-45mm thickness foam boards need another set of T-die. Forming die (sizing die) is moved up and down by hydraulic, cooled by water, cycling cooling water.


Making 5-25mm thickness free foam board just needs 80/156 conical double screw extruder
Making 25-45mm thickness free foam board needs 92/188 conical twin screw extruder
Making 5-25mm thickness skinning foam board needs 80/156 extruder + 65/132 extruder
Making 25-45mm thickness skinning foam board needs 92/188 extruder + 80/156 extruder)

Conical double screw extruder with a parallel twin screw feeder, which can avoid the PVC powder material block. The extruder adopts 38CrMoAlA screw and barrel, world-famous brand electrical parts such as Siemens, Schneider, Omron, ABB etc. Machine with twin screw feeder which can feeding material continuously and stable into screw and barrel. Screw feeder is equipped with limit switch, which is used to guarantee the material loading equal and continuously, or is equipped with vacuum loader, which can help solve PVC powder dust problem for client.

Eight-roller haul-off adopts 8 group rubber hauling rollers, driven by 5.5KW motor, guarantee enough powder for foam board processing. An small device can be added in front of the haul-off to give protect film laminated on the board. 4 cutting saws can be equipped behind the haul-off, and.Up two are side cutters, fixed to cut the wrong sides of the foam board, center distance 4′. Down two are division cutters. They are moveable, used to cut the board into small wide when required. For example, clients need 600mm board, then they can use division cutter to cut the board into 600mm and 620mm, or 600mm + 600mm +20mm. And this 20mm foam board can be recycled again.

Cutter with PLC control, cutting length can be set by client requirement.

WPC Foam Board Extrusion Line Flow

Raw material mixing–feeding— SJZ series conical twin screw extruder→ die mould → vacuum calibration table→cooling bracket→haul-offs→ transversal cutter→edge cutter→stacker

Display of Final Product